View AO4606_415767.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Feb 2003
AO4606 Complementary Enhancement Mode Field Effect Transistor
General Description
The AO4606 uses advanced trench technology MOSFETs to provide excellent RDS(ON) and low gate charge. The complementary MOSFETs may be used to form a level shifted high side switch, and for a host of other applications.
Features
n-channel VDS (V) = 30V ID = 6.9A RDS(ON) < 28m (VGS=10V) < 42m (VGS=4.5V) p-channel -30V -6A RDS(ON) < 35m (VGS = 10V) < 58m (VGS = 4.5V)
D2 S2 G2 S1 G1 1 2 3 4 8 7 6 5 D2 D2 D1 D1
D1
G2 S2
G1 S1
SOIC-8
n-channel
p-channel
Absolute Maximum Ratings TA=25C unless otherwise noted Parameter Max n-channel Symbol VDS Drain-Source Voltage 30 Gate-Source Voltage Continuous Drain Current A Pulsed Drain Current Power Dissipation
B
Max p-channel -30 20 -6 -5 -30 2 1.44 -55 to 150
Units V V A
VGS TA=25C TA=70C TA=25C TA=70C ID IDM PD TJ, TSTG
20 6.9 5.8 30 2 1.44 -55 to 150
W C
Junction and Storage Temperature Range
Thermal Characteristics: n-channel and p-channel Parameter t 10s Maximum Junction-to-Ambient A A Steady-State Maximum Junction-to-Ambient C Steady-State Maximum Junction-to-Lead A t 10s Maximum Junction-to-Ambient A Steady-State Maximum Junction-to-Ambient Steady-State Maximum Junction-to-Lead C
Symbol RJA RJL RJA RJL
Device n-ch n-ch n-ch p-ch p-ch p-ch
Typ 48 74 35 48 74 35
Max Units 62.5 C/W 110 C/W 60 C/W 62.5 110 40 C/W C/W C/W
Alpha & Omega Semiconductor, Ltd.
AO4606
N-Channel Electrical Characteristics (T =25C unless otherwise noted) J Symbol Parameter Conditions ID=250A, VGS=0V VDS=24V, VGS=0V TJ=55C VDS=0V, VGS=20V VDS=VGS ID=250A VGS=4.5V, VDS=5V VGS=10V, ID=6.9A RDS(ON) gFS VSD IS Static Drain-Source On-Resistance VGS=4.5V, ID=5.0A Forward Transconductance VDS=5V, ID=6.9A 10 IS=1A Diode Forward Voltage Maximum Body-Diode Continuous Current TJ=125C 1 20 22.5 31.3 34.5 15.4 0.76 1 3 680 VGS=0V, VDS=15V, f=1MHz VGS=0V, VDS=0V, f=1MHz 102 77 3 13.84 VGS=10V, VDS=15V, ID=6.9A 6.74 1.82 3.2 4.6 VGS=10V, VDS=15V, RL=2.2, RGEN=3 IF=6.9A, dI/dt=100A/s 4.1 20.6 5.2 16.5 7.8 28 38 42 1.9 Min 30 1 5 100 3 Typ Max Units V A nA V A m m S V A pF pF pF nC nC nC nC ns ns ns ns ns nC
STATIC PARAMETERS BVDSS Drain-Source Breakdown Voltage IDSS IGSS VGS(th) ID(ON) Zero Gate Voltage Drain Current Gate-Body leakage current Gate Threshold Voltage On state drain current
DYNAMIC PARAMETERS Ciss Input Capacitance Coss Crss Rg Output Capacitance Reverse Transfer Capacitance Gate resistance
SWITCHING PARAMETERS Qg(10V) Total Gate Charge Qg(4.5V) Total Gate Charge Qgs Qgd tD(on) tr tD(off) tf trr Qrr Gate Source Charge Gate Drain Charge Turn-On DelayTime Turn-On Rise Time Turn-Off DelayTime Turn-Off Fall Time Body Diode Reverse Recovery Time
Body Diode Reverse Recovery Charge IF=6.9A, dI/dt=100A/s
A: The value of R JA is measured with the device mounted on 1in2 FR-4 board with 2oz. Copper, in a still air environment with TA=25C. The value in any a given application depends on the user's specific board design. The current rating is based on the t 10s thermal resistance rating. B: Repetitive rating, pulse width limited by junction temperature. C. The R JA is the sum of the thermal impedence from junction to lead RJL and lead to ambient. D. The static characteristics in Figures 1 to 6 are obtained using 80 s pulses, duty cycle 0.5% max. 2 E. These tests are performed with the device mounted on 1 in FR-4 board with 2oz. Copper, in a still air environment with TA=25C. The SOA curve provides a single pulse rating.
Alpha & Omega Semiconductor, Ltd.
AO4606
P-Channel Electrical Characteristics (T =25C unless otherwise noted) J Symbol Parameter Conditions ID=-250A, VGS=0V VDS=-24V, VGS=0V TJ=55C VDS=0V, VGS=20V VDS=VGS ID=-250A VGS=-10V, VDS=-5V VGS=-10V, ID=-6A RDS(ON) gFS VSD IS Static Drain-Source On-Resistance VGS=-4.5V, ID=-5A Forward Transconductance VDS=-5V, ID=-6A Diode Forward Voltage IS=-1A,VGS=0V Maximum Body-Diode Continuous Current TJ=125C -1.2 30 28 37 44 13 -0.76 -1 -4.2 920 VGS=0V, VDS=-15V, f=1MHz VGS=0V, VDS=0V, f=1MHz 190 122 3.6 18.5 VGS=-10V, VDS=-15V, ID=-6A 9.6 2.7 4.5 7.7 VGS=-10V, VDS=-15V, RL=2.7, RGEN=3 IF=-6A, dI/dt=100A/s 5.7 20.2 9.5 20 8.8 35 45 58 -2 Min -30 -1 -5 100 -2.4 Typ Max Units V A nA V A m m S V A pF pF pF nC nC nC nC ns ns ns ns ns nC
STATIC PARAMETERS BVDSS Drain-Source Breakdown Voltage IDSS IGSS VGS(th) ID(ON) Zero Gate Voltage Drain Current Gate-Body leakage current Gate Threshold Voltage On state drain current
DYNAMIC PARAMETERS Ciss Input Capacitance Coss Crss Rg Output Capacitance Reverse Transfer Capacitance Gate resistance
SWITCHING PARAMETERS Qg(10V) Total Gate Charge (10V) Qg(4.5V) Total Gate Charge (4.5V) Qgs Qgd tD(on) tr tD(off) tf trr Qrr Gate Source Charge Gate Drain Charge Turn-On DelayTime Turn-On Rise Time Turn-Off DelayTime Turn-Off Fall Time Body Diode Reverse Recovery Time
Body Diode Reverse Recovery Charge IF=-6A, dI/dt=100A/s
2
A: The value of R JA is measured with the device mounted on 1in FR-4 board with 2oz. Copper, in a still air environment with TA =25C. The value in any a given application depends on the user's specific board design. The current rating is based on the t 10s thermal resistance rating. B: Repetitive rating, pulse width limited by junction temperature. C. The R JA is the sum of the thermal impedence from junction to lead RJL and lead to ambient. D. The static characteristics in Figures 1 to 6,12,14 are obtained using 80 s pulses, duty cycle 0.5% max. E. These tests are performed with the device mounted on 1 in 2 FR-4 board with 2oz. Copper, in a still air environment with TA=25C. The SOA curve provides a single pulse rating.
Alpha & Omega Semiconductor, Ltd.
AO4606 N-CHANNEL TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS
30 10V 25 20 ID (A) 15 10 5 0 0 1 2 3 4 5 VDS (Volts) Fig 1: On-Region Characteristics VGS=3V ID(A) 6V 5V 4.5V
20 16 12 8 4 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 VGS (Volts) Figure 2: Transfer Characteristics 125C 25C VDS=5V
4V
3.5V
60 50 RDS(ON) (m) 40 30 20 10 0 5 10 15 20 ID (Amps) Figure 3: On-Resistance vs. Drain Current and Gate Voltage VGS=4.5V Normalized On-Resistance
1.6 1.5 1.4 1.3 1.2 1.1 1 0.9 0.8 0 50 100 150 200 Temperature ( C) Figure 4: On-Resistance vs. Junction Temperature VGS=4.5V
ID=5A
VGS=10V
VGS=10V
70 60 RDS(ON) (m) 50 40 30 125C
1.0E+01
ID=5A
IS Amps
1.0E+00 1.0E-01 1.0E-02 1.0E-03 1.0E-04 25C 125C
20 10 2 4 6
25C 1.0E-05 0.0 8 10 0.2 0.4 0.6 0.8 1.0 VSD (Volts) Figure 6: Body diode characteristics
VGS (Volts) Figure 5: On-Resistance vs. Gate-Source Voltage
Alpha & Omega Semiconductor, Ltd.
AO4606 N-CHANNEL TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS
10 8 VGS (Volts) 6 4 2 0 0 2 4 6 8 10 12 14 Qg (nC) Figure 7: Gate-Charge characteristics 1000 VDS=15V ID=6.9A Capacitance (pF) 900 800 700 600 500 400 300 200 100 0 0 Crss 5 10 15 20 25 30 Coss Ciss f=1MHz VGS=0V
VDS (Volts) Figure 8: Capacitance Characteristics
100 RDS(ON) limited 10 ID (Amps) 1ms 10ms 0.1s 1 1s 10s DC 0.1 0.1 1 VDS (Volts) 10
TJ(Max)=150C TA=25C 100s 10s Power W
40 TJ(Max)=150C TA=25C
30
20
10
100
0 0.001
0.01
0.1
1
10
100
1000
Figure 9: Maximum Forward Biased Safe Operating Area (Note E)
Pulse Width (s) Figure 10: Single Pulse Power Rating Junction-toAmbient (Note E)
10 Z JA Normalized Transient Thermal Resistance
D=Ton/T TJ,PK=TA+PDM.ZJA.RJA RJA=62.5C/W
In descending order D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse
1
0.1
PD Ton
Single Pulse 0.01 0.00001 0.0001 0.001 0.01 0.1 1
T 100 1000
10
Pulse Width (s) Figure 11: Normalized Maximum Transient Thermal Impedance
Alpha & Omega Semiconductor, Ltd.
AO4606
P-CHANNEL TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS
30 -10V 25 20 -ID (A) 15 10 5 VGS=-3V 0 0 1 2 3 4 5 -VDS (Volts) Fig 1: On-Region Characteristics 60 50 45 RDS(ON) (m) 40 35 30 25 20 15 10 0 5 10 15 20 25 -ID (A) Figure 3: On-Resistance vs. Drain Current and Gate Voltage 80 70 60 RDS(ON) (m) 50 40 30 20 1.0E-05 10 0 3 6 7 8 9 10 -VGS (Volts) Figure 5: On-Resistance vs. Gate-Source Voltage 4 5 1.0E-06 0.0 0.2 0.4 0.6 0.8 1.0 -VSD (Volts) Figure 6: Body-Diode Characteristics 25C 125C ID=-6A 1.0E+01 1.0E+00 1.0E-01 -IS (A) 1.0E-02 1.0E-03 1.0E-04 25C 125C 0.80 0 25 50 75 100 125 150 175 Temperature (C) Figure 4: On-Resistance vs. Junction Temperature VGS=-10V VGS=-4.5V Normalized On-Resistance 55 1.60 ID=-6A 1.40 VGS=-10V 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 -VGS(Volts) Figure 2: Transfer Characteristics -3.5V -6V -5V -4.5V 30 25 -4V -ID(A) 20 15 10 5 125C 25C VDS=-5V
1.20
VGS=-4.5V
1.00
Alpha & Omega Semiconductor, Ltd.
AO4606
P-CHANNEL TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS
10 8 -VGS (Volts) 6 4 2 0 0 4 8 12 16 20 -Qg (nC) Figure 7: Gate-Charge Characteristics 1500 VDS=-15V ID=-6A Capacitance (pF) 1250 1000 750 500 Coss 250 0 0 5 10 15 20 25 30 -VDS (Volts) Figure 8: Capacitance Characteristics Crss
Ciss
100.0 TJ(Max)=150C, TA=25C RDS(ON) limited 0.1s 1.0 10s 100s 1ms 10ms 1s 10s 0.1 0.1 1 -VDS (Volts) Figure 9: Maximum Forward Biased Safe Operating Area (Note E) 10 100 DC
40
TJ(Max)=150C TA=25C
Power (W)
-ID (Amps)
10.0
30
20
10
0 0.001
0.01
0.1
1
10
100
1000
Pulse Width (s) Figure 10: Single Pulse Power Rating Junction-toAmbient (Note E)
10 ZJA Normalized Transient Thermal Resistance D=Ton/T TJ,PK=TA+PDM.ZJA.RJA RJA=62.5C/W 1 In descending order D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse
PD 0.1 Ton Single Pulse 0.01 0.00001 T
0.0001
0.1 1 10 Pulse Width (s) Figure 11: Normalized Maximum Transient Thermal Impedance
0.001
0.01
100
1000
Alpha & Omega Semiconductor, Ltd.
ALPHA & OMEGA
SEMICONDUCTOR, INC.
SO-8 Package Data
DIMENSIONS IN MILLIMETERS SYMBOLS
DIMENSIONS IN INCHES
A A1 A2 b c D E1 e E h L aaa
MIN 1.45 0.00 --- 0.33 0.19 4.80 3.80 5.80 0.25 0.40 --- 0
NOM 1.50 --- 1.45 --- --- --- --- 1.27 BSC --- --- --- --- ---
MAX 1.55 0.10 --- 0.51 0.25 5.00 4.00 6.20 0.50 1.27 0.10 8
MIN 0.057 0.000 --- 0.013 0.007 0.189 0.150 0.228 0.010 0.016 --- 0
NOM 0.059 --- 0.057 --- --- --- --- 0.050 BSC --- --- --- --- ---
MAX 0.061 0.004 --- 0.020 0.010 0.197 0.157 0.244 0.020 0.050 0.004 8
NOTE: 1. LEAD FINISH: 150 MICROINCHES ( 3.8 um) MIN. THICKNESS OF Tin/Lead (SOLDER) PLATED ON LEAD 2. TOLERANCE 0.10 mm (4 mil) UNLESS OTHERWISE SPECIFIED 3. COPLANARITY : 0.10 mm 4. DIMENSION L IS MEASURED IN GAGE PLANE
PACKAGE MARKING DESCRIPTION
RECOMMENDED LAND PATTERN
LOGO 4 6 0 6 FAYWLC
NOTE: LOGO 4606 F A Y W LC
- AOS LOGO - PART NUMBER CODE. - FAB LOCATION - ASSEMBLY LOCATION - YEAR CODE - WEEK CODE. - ASSEMBLY LOT CODE
SO-8 PART NO. CODE
UNIT: mm
PART NO. AO4606
CODE 4606
Rev. A
ALPHA & OMEGA
SEMICONDUCTOR, INC.
SO-8 Carrier Tape
SO-8 Tape and Reel Data
SO-8 Reel
SO-8 Tape
Leader / Trailer & Orientation

▲Up To Search▲

Price & Availability of AO4606

	To Download AO4606 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .